Produktai skirti durex alternatyva (2)

ECOFIX PLUS the best adhesive spray for printing boards ECOFIX PLUS is an high tack adhesive specially indicated for the textile silk-screen printing industry. It is suitable to keep the fabrics steady to their support while being printed. CHEMICAL BASE BASE: Synthetic rubbers and solid resins SOLVENTS: hydrocarbure group, benzen and omologous are absent PROPELLENT: Denaturate odourless hydrocarbure COLOUR: Yellow clear VISCOSITY: Middle IT DOES NOT CONTAINS CFC MAIN CHARACTERISTICS It does not transfer on the fabric or cloths printed. It does not dirty the fabrics. It is suitable for cotton, silk, wool, synthetic fabrics, cotton, mixed. It resists to many applications. It has a good resistance to heat. It is also suitable in embroidery industry to keep the cloth steady during embroidery. In the cut rooms it gets the adhesion of the model to the cloth during the cut. DIRECTIONS FOR USE Shake well the can before use. Spray the product from a distance of 25-30 cm. Remove it with wash solvent perchloroethylene.

PLASTISOL INKS PHTHALATE-FREE AND WITH LOW MIGRATION FOR DIRECT AND TRANSFER SILK-SCREEN PRINTING PLASTISOL INK EXTRAFLEX XFE Extraflex XFE is a range of screen printing phtalate-free plastisol inks suitable for print onto any kind of fabric. The charateristics of Extraflex XFE inks grant a low bleed onto coloured synthetic fabrics. The series is composed of ready-to-print colours, bases and additives. XFE colours are ideal for “wet on wet“ printing, while on Lycra it is advisable to flash cure between colours. These inks are also suitable for the printing of cold and hot peel transfers. READY TO PRINT COLOURS All Extraflex XFE colours enjoy optimal charateristics of coverage and printability (up to 305 mesh, 120T) and are suitable to direct print onto any kind of fabric. Process series is particulary suitable for the creation of four colours process prints with screens of 305 mesh (120T).